Oliver
22 October 2021 01:11
11
Hi Martin,
Yes, it’s always worked fine for me, though I know some people have run into bluetooth issues. Here’s a forum post I made in the past explaining my process:
Hi All,
I was able to pair both an SN30 Pro+ and a Pro 2 without issue - I’m not sure what the issue may be that you’re all facing
The procedure I followed was:
Grab a preloaded RetroPie SD card from our shelf stock
Boot it up on a Pi 4 8GB
Setup a USB keyboard
Open up the Bluetooth configuration
Press and Hold Start + Y (Switch mode) and then immediately hit Enter on "Register and Connect to Bluetooth Device
Quickly tap down the manual to select Pro Controller, then hit Enter
Hit…
1 Like