FAN SETUP PROCEDURES AND TESTING:…this is for raspberry Debian tested on it…
after assembly set the jumper to 1 and 2 for default setting
or set it to 2 and 3 if you want the fan to run continuously
if you use this option there is no need to install the program…
so if you want software control then set the jumper to default 1 and 2…
making shore you are connected to the internet
download from argon the setup file to your directory of choice just click on the link it will start the download
https://download.argon40.com/argon1.sh
open a terminal as root user
change into the directory where the file was saved and code the following
chmod 755 argon1.sh
next code
./argon1.sh
and it will start to install the software
once it has finished you should have two icons appear on the desktop now .
if using a terminal you can run different options by this code follow options given…
argonone-config
or you can manually edit the config file and set the trip points to your preference`s
nano /etc/argononed.conf
just manually code it yourself
you can code as many trip points as you want not shure how many
temperature is on the left field and fan speed on the right…
example::
delete the figures in the file now and copy paste these figures into the file
30=50
35=60
40=80
42=100
save the file…
power cycle the rpi
with these figures above your fan should be running as soon as you power it up or shortly after open a browser and load up the cpu yourself or
you can self test by installing stressberry
i only have the argon fan hat which does have a switch on it but no jumper or i/r led/s
as far as i know all the fans use the same setup program…however this may change once the argon remote is released…
i added the below for the users with the M-2 drive addons
It is compatible with any M.2 SATA SSD with Key-B and Key B&M .
just browse for the specs and type of ssd you would like to use with the M-2 sata bridge unit…
here is a explanation link… also check that the ssd you are wanting to acquire does not exceed 5 watts…power drain
admin pls remove the above link if not appropriate…thx i cannot find any exp on the argon home page…
